Sequences you can change while they run
Stylophone has introduced On-The-Fly, a hardware sequencer designed for changing patterns during performance. The company announced it on 5 November, and Synthtopia covered the instrument the following day. It is a sequencer for controlling other equipment, so plan the connection to a sound source as part of the setup.
Stylophone says its eight-step controls can be used to build 16, 32 or 64-step sequences, with eight pattern chains that can be switched while playing. Forward, reverse and bounce directions are available, alongside controls for pitch, rhythm and step effects.
Memories, recording and timing
The manufacturer lists 24 sequence memories and a loop-record function. It also describes scale and transpose controls, swing, lead/lag timing and adjustable note and gate lengths. One detail needs clarification: different Stylophone pages give different maximum loop-record lengths, so check the current manual before relying on a particular limit.
Connecting a modular or MIDI rig
On-The-Fly provides CV, gate, sync and MIDI connections. Stylophone lists eight individual step-gate outputs as well as a summed gate output. Those separate outputs can be considered when planning which external instruments or modules should respond to individual steps; confirm connector and signal requirements in the manual for your gear.
The manufacturer also says multiple units can be linked and synchronized. We have not tested the sequencer or its timing with a particular instrument, so make a short routing and sync check before building a performance around it.
stylophone.comStylophone: introducing On-The-Fly/introducing-stylophone-otf/Open source in a new tabstylophone.comStylophone On-The-Fly specifications/product/stylophone-on-the-fly/Open source in a new tabsynthtopia.comSynthtopia: On-The-Fly performance sequencer/content/2026/11/06/stylophone-on-the-fly-performance-sequencer-features-24-memories-loop-recording/Open source in a new tab