Sequence notes and gestures
Embodme’s Erae 2 gained a step sequencer in version 2.1.0, an update also covered by Gearnews. Each layout has eight patterns of up to 256 steps. You can draw notes and shape pressure, slide and pitch lanes, or record a keyboard’s X, Y and pressure gestures.
According to Embodme, patterns can play through MIDI and CV outputs and follow either the internal clock or a DAW clock over USB MIDI. For a performance setup, check the routing and clock source before building a longer pattern. Bounce Loop converts a recorded loop into a sequence pattern.
Custom scales have a model-specific limit
Erae 2 users can create custom Keygrid scales in Erae Lab, including equal divisions and free ratios, and import or export Scala files. Embodme says custom scales require MPE on the keyboard and matching firmware. The sequencer is also listed for the original Erae Touch, but custom scales are an Erae 2 feature; on Erae Touch a keyboard set to a custom scale falls back to Major.
Check the newer fix and update procedure
Embodme lists version 2.1.1 after 2.1.0. Its fixes include an Erae 2 issue involving empty layout slots while the sequencer is active, plus recovery when sending a project is interrupted. Check the current patch notes for the version offered to your device.
For Erae 2, Embodme’s update guide says to use an up-to-date Erae Lab, connect power and the USB Device port, and close other MIDI software before updating. It also says not to disconnect while the display shows Installing. Follow the manufacturer’s current instructions for your specific hardware.
embodme.comEmbodme Erae patch notes/downloads/patch-notesOpen source in a new tabembodme.comEmbodme: updating Erae 2 firmware/platform/learn/3c424c5f-0f8e-50a2-a040-b3336db3c761/erae2-firmware-updateOpen source in a new tabgearnews.comGearnews: Erae 2 update 2.1.0/embodme-erae-2-review-studio/Open source in a new tab